Contact We are currently on vacation till 01/04/2024. The next shipping date will be Tuesday, 2nd of April. During this period the shop is closed except for products shipped through our third-party warehouse (large frames, large panels, 3D printer kits). For any questions please leave us a message via the contact form.

Linneo Stealthburner LED Harness (internal)

US$9.95

(1 customer review)
Linneo Stealthburner LED Harness
Linneo Stealthburner LED Harness (internal) US$9.95

Linneo Stealthburner LED Harness (internal)

The Linneo Stealthburner LED Harness provides you with a ready made harness to connect the three LEDs to the Linneo cable harness (or Linneo Upgrade harness) please order “Molex” version. If you are using the Stealthburner PCB, please order the “JST PH” version. For the Stealthburner 2-piece PCB please use the “Dupont” version

The harness comes with a 3pin Molex Microfit 3.0 connector (Molex version), JST PH connector (JST PH version) or Dupont connector (Dupont version) on one end and three RGBW LEDs (you can can choose between warm, natural and cold white).

It fits perfectly in the Stealthburner cable guides.

Additional information

Weight0.01 kg
Dimensions6 × 5 × 1 cm
Color

Cold White & RGB, Natural White & RGB, Warm White & RGB

Connector

Molex, JST PH, Dupont

origin_country

ES

hs_code

84779080

Brand

Linneo

1 review for Linneo Stealthburner LED Harness (internal)

  1. Henry (verified owner)

    The LEDs work fine, but the solder joints themselves aren’t terribly strong, probably because the wire is a bit too thin. Whilst installing it, the wires broke a few times, meaning I had to resolder them myself and replace some of them with some 22AWG silicone wire off of eBay. It’s not horrific, but I did have to put extra work in and I was expecting better.

    • OneTwo3D

      Thanks for the feedback. I’ll discuss that with Linneo. If you want the led harness can also be swapped for a new one.

Only logged in customers who have purchased this product may leave a review.