Contact We are currently on vacation till 01/04/2024. The next shipping date will be Tuesday, 2nd of April. During this period the shop is closed except for products shipped through our third-party warehouse (large frames, large panels, 3D printer kits). For any questions please leave us a message via the contact form.

Tool-Head PCB for Voron Afterburner (V3.2)

Tool Head PCB for Voron Afterburner

Tool-Head PCB for Voron Afterburner (V3.2)

This product is currently out of stock and unavailable.

Tool-Head PCB for Voron Afterburner (V3.2)

Clean up the wiring harness for your Voron Afterburner by using this Tool-Head PCB (designed by hartk#1213).

Warning: do not use with fans set to voltages lower than 24V. The PCB is using a common supply rail which will supply fans (and feed back to the controller board) 24V, whatever you set as fan voltage on the controller board! If you want to use lower voltage fans go for the V2.rabbit variant

Warning: Please mount the nylon washer which is now included with the PCB under the head of the bolt fixing the PCB to the Afterburner. This protects it generating a potential short circuit between a 24V trace close to the screw hole and the bolt. The V.rabbit version is not affected by this.

The product is available (whilst stock lasts):

  • The PCB (with SMD components pre-assembled) and other components and connectors included seperately, which can be soldered on by the customer.
  • PCB only (with SMD components pre-assembled)

The board design includes:

  • One BAT85 Diode for the ABL probe
  • An indicator LED to show when the hotend is active
  • Several 2/3/4 pin headers for most components on the toolhead
  • One 2 Pin Microfit 3.0 for the heater (incl. the fitting counterpart connector)
  • One 0402 pkg thermistor (chamber temperature sensor)
  • One 14 Pin Microfit 3.0 for the main wiring loom back to the MCU (incl. the fitting counterpart connector)

The board was designed to make wiring the toolhead a bit easier. As a result it is helping to reduce the amount of crimping contacts needed and to clean up the cable harness.

The board has provisions for the X endstop, which makes it compatible with the Voron V1, V2, and Switchwire

The STL for the 3D mount is available on GitHub.

Here you can also find an improved version of the cover plate (it seems to be working better than the original HartK one).

You can find more infos on the Toolhead PCB on its project page on GitHub.

Additional information

Weight0.01 kg
Dimensions5 × 5 × 2.5 cm
Assembled

Fully assembled, Not assembled (PCB & parts), Not assembled (PCB only)

Printer Compatibility

Voron 1.8, Voron 2.4, Voron Switchwire

origin_country

CN

Brand

Linneo

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.