Re-enforced Gantry Mounts for Voron 2.4 & Redoubt by Annex Engineering
What’s that?
This new z joint has been developed for Redoubt but is backwards compatible with V2.2 and V2.4. The main advantage being that the gantry is now 13mm closer to the linear rails. Internal testing has shown that there is a noticeable improvement and less ringing for the Y axis. The ball head screw also allows the gantry to move smoothly in the printed part in comparison to the old design where layer lines rubbed each other. The pre-tensioning mechanism allows you to have zero play in the joint. The belt clips don’t have to come loose to swap the z joint and lastly due to its compact size full travel of the linear rails is possible. Compatible with a 0.6 nozzle and 0.3LH.
Content:
This kit contains all (and a bit more…) hardware (in stainless steel) needed for four Annex Re-enforced Gantry Mounts for Voron 2.4. You will need to print the ABS parts.
5x 02152 ball head screws
5x DIN913/ISO4026 M10x20 (flat end)
17x DIN912 M3x12
5x DIN912 M3x16
5x 1mm M5 washer
3x DIN912 M3x20 (optional for spacer)
