Nevermore StealthMax Filter Kit Basic
The no frills filter kit for your Voron printer: activated carbon plus Hepa filtering.
The air is cycled within your printing chamber, so no temperature loss by letting air out of the chamber.
This basic kit contains all components needed for the filtering function (except printed parts) but leaves out the “fancy” electronics for air quality monitoring (for the advanced kit please use this link):
Nuts and Bolts
| M2x4mm Flat Head (<0.8mm) screws | 3 |
| M2x6mm Self Tapping | 4 |
| M3x6mm BHCS | 26 |
| M3x8mm SHCS | 2 |
| M3x10mm BHCS | 5 |
| M3x12mm SHCS | 7 |
| M3x16mm SHCS | 1 |
| M3x20mm SHCS | 2 |
| M3x25mm SHCS | 4 |
| Heat Inserts (M3x5x4mm) | 31 |
| M10 threaded DC connector (pair) | 1 |
Electronics & Wiring
- 1x M8 threaded DC connector
- 1x JST-PH 4-pin male GPU fan connector
- 1x Nevermore fan
Extras
- 1x Linneo 250mm round polycarbonate (PC) sheet, 3mm thick
- 1x Pneumatic Bowden Fitting M10
- 2x HEPA filters (130×40 mm, same as Xiaomi Mijia G1)
- Heat shrink tubing suitable for AWG26/28
- 1m Polymax Neopren Sponge Cord (3mm)
- 2x Nevermore XL Carbon refills
More info on GIT
Reviews
There are no reviews yet.