Nevermore Mini Basic Kit

Mini size – Max performance. A new standard in tiny printer filtration.

Same performance as 3-6 Nevermore Micros, plus HEPA filtration, in an adaptable package. Use with a single fan controlled by the printer, as standalone (Basic Kit) or as a connected MCU with VOC sensors (Advanced add-on kit needed): Mini got you covered.

This kit contains all components needed (except 3D printed parts) to build the basic version of the Nevermore Mini (without display and air quality monitoring) and fill it with Nevermore carbon:

• 8x 6mm(OD) x 3 mm cylindric magnets (N35)
• 4x M3x6 BHCS
• 6x M3x6 SHCS
• 2x M3x8 SHCS
• 10x M3 4mm Heat Inserts
• 2x M3 T-Nut (HNTAJ5-3)
• 4x Wago 221-2411
• 4x 20cm  AWG28 wire in red, black, blue and yellow
• 1x Molex 43645-0400
• 1x Molex 43640-0401
• 5x Molex 43031 Male Crimp
• 5x Molex 43030 Female Crimp
• 1x Mini HEPA Filter (replacement filters here)
• 1x Nevermore Carbon (small)
• 1x Fan (24V Mechatronics 4028, 4pin PWM controlled)

Pin Out

The fan uses the default PWM fan pinout, blue for the PWM signal, yellow for the tach signal, red for +24V and black for GND

More info on GIT