EMU Solo Lane Board (SLB)
The EMU Solo Lane Board (SLB) is a control board designed specifically for EMU-style MMU systems, where each lane is driven by an independent controller board.
No WAGO connectors and no LED daisy-chaining. Supports power and CANBUS cascading, and is compatible with the EMU_Hatch_Board, greatly simplifying EMU wiring.
Notice: Maximum rated current for SLB is 8A. If you plan to use PTC drying, only one unit can be operated at a time. For more than one unit, please use WAGO terminals to connect the power supply in parallel.
The SLB is not only suitable for EMU, but can also provide additional channel expansion for systems such as BoxTurtle. The board itself includes built-in support for controlling N20 motors.
This board is factory-produced using high-quality electronic components with SMT assembly, ensuring reliable and consistent quality.
Features:
- Main Chip: STM32G0B1CBT6 MCU.
- Dual power connectors and dual CAN interfaces for convenient daisy-chaining.
- 1 x Onboard TMC2209 operating in UART mode, with 5V logic circuitry.
- 1x 8-pin XH2.54 connector is provided for direct connection to the EMU Hatch Board.
- 2 × Neo pixel RGB interfaces, one of which is integrated into the 8-pin XH2.54 connector.
- 6 × I/O connectors, two of which are integrated into the 8-pin XH2.54 connector.
- 3 × Hardware I2C interfaces, one of which is integrated into the 8-pin XH2.54 connector.
- 2 × 24V fans with adjustable speed control
- 1 × PTC heating interface, 5A max
- 1 × NTC temperature sensor interface for temperature monitoring
- 1 x Hall ADC interfaces for PSF Sensor
- 1 x 5V Brushed DC motor drivers with forward/reverse support, En pin, and sleep mode, support hardware PWM.
- 1 x Hardware SPI interfaces
More details on GIT













Reviews
There are no reviews yet.