Clicky-Clacky Door for Voron 2.4 by LDO
The Clicky-Clacky Fridge Door Kit has been designed by whopping and produced by LDO. It is a great single piece door which allows for smooth and satisfying opening and closing with a nice clicking sound.
The purchase of this item helps to support the designer of this mod. Thank you for your contribution to this community.
From GitHub
Inspired by Doc’s fridge door mod and the EZBake Trident Doom conversion, I set out to design a hinge and latch system that could securely close an extrusion-framed door against 3mm foam tape, while also yielding some satisfying sounds.
This solution is what fit the bill for me. The door opens smoothly, and can be easily removed from the hinges simply by lifting up. The latch mechanism actually draws the door closed against the sealing foam when closed, and clicks shut with the help of some magnets. It makes nice sounds.
For more information please see the GitHub (including STL files)
What’s not included?
You’ll need to source
- 3D printed parts (STLs can be downloaded here)
- 3mm panels (available on OneTwo3D here)
- 0.3mm foam tape (to tape along the sides) or 2mm foam tape (to tape over the edges) if 6mm panels are not fitting correctly due to tolerances in panel or extrusion slot size.
Due to variations in the anodising process, the door frame colours may vary from the colour of the LDO printer frames.
William Sexton (verified owner) –
Everything you need except the panel and printed parts.